Inversor MUST PH30-10048-T
10 kW
Ref. PH30-10048-T
Consultar precio
Precio informativo; confirme precio y disponibilidad con un asesor.
Consultar disponibilidad
Este inversor de MUST, modelo PH30-10048-T, convierte la electricidad de la batería y de los paneles solares en la corriente alterna que usan los enchufes de la casa o del negocio. Entrega 10 kW (kilovatios) de potencia y trabaja con baterías de 48 voltios.
¿Tiene dudas? Escríbanos por WhatsApp.
Escribir por WhatsApp- Peso neto
- 128 kg
- Peso bruto
- 133 kg
- Dimensiones
- 392*828*629
- Embalaje
- 513*1031*700
Potencia del inversor10 kW
Voltaje del sistema48 V
Características clave
- Nominal Voltage48VDC
- Communication terminalRS485 / CAN bus
Todas las especificaciones
General
| Nominal Battery System Voltage | 48VDC |
|---|
INVERTER OUTPUT
| Rated output power | 10000W |
|---|---|
| Output wave | Pure sine wave |
| Nominal output voltage | 230 VAC (P-N) / 400 VAC (P-P) |
| Nominal output current | 14.3A per phase |
| Nominal output frequency | 50 Hz / 60 Hz |
| Rate of wave distortion(THD)(Linearity loads) | Off grid≤2%; Grid discharge ≤3%; Grid charge ≤3% |
| Peak efficiency | ≥93% |
| Overload capability | 100%<load≤110%,30 minutes; 110%<load≤125%,1 minutes; 125%<load≤150%,30 seconds; load<150%,10 seconds; Short circuit,5 seconds |
AC INPUT
| AC input maximum current | 26.0A per phase |
|---|---|
| Nominal frequency | 50Hz / 60Hz |
| Acceptable input voltage range | Defaults 186Vac ~253Vac per phase;Narrow 174Vac ~272Vac per phase; Wide 95Vac ~272Vac per phase |
BATTERY
| Type of Battery | Lithium battery or lead-acid battery |
|---|---|
| Nominal Voltage | 48VDC |
| Low Voltage Protection Point | Charger 34.0VDC; Inverter 40.0VDC |
| Absorption Voltage | 50.0VDC |
| Refloat Voltage | 54.8VDC |
| Float Voltage | 57.2VDC |
SOLAR CHARGER & AC CHARGER
| PV Open Circuit Voltage | 145VDC |
|---|---|
| Max Solar Charging Current | 60A per channel |
| Max AC Charging Current | 60A per phase |
| Max Charging Current | 120A per phase |
MECHANICAL SPECIFICATIONS
| Mounting | Floor installation |
|---|---|
| Machine Dimension (W*H*D)(mm) | 392*828*629 |
| Package Dimension (W*H*D)(mm) | 513*1031*700 |
| N.W(kg) | 128 |
| G.W(kg) | 133 |
OTHER
| Communication terminal | RS485 / CAN bus |
|---|---|
| Operating Temperature Range | 0℃ ~ +50℃ |
| Environmental Protection Rating | IP20 |
| Ambient humidity | 0 -- 90% relative humidity (non-condensing) |
| Altitude | ≤2000m |